Accurate Consistency Measurement: Monitors cement slurry thickening time in real-time under simulated downhole HTHP conditions, ensuring reliable well integrity.
HTHP Capability: Operates under extreme temperatures (up to 250℃ or 482℉) and pressures (up to 200MPa or 29,007psi), meeting API and ISO standards.
High Precision: Temperature Precision is ±1%; Pressure Accuracy is ±0. 5%.
User-Friendly Interface: Equipped with intuitive software for data logging, analysis, and report generation.
Durable Construction: High-grade materials ensure long-term reliability in demanding environments.
Safety: Consistency Alarm and Shut-down Protection.
Higher Efficiency: A dual-cell consistometer allows simultaneous testing of two samples, significantly reducing testing time compared to a single-cell device, which can only test one sample at a time.
Improved Comparative Analysis: Enables direct side-by-side comparison of two fluid samples (e.g., drilling fluids, cement slurries) under identical conditions, ensuring more reliable and consistent results.
Enhanced Consistency Control: Reduces variability caused by sequential testing in single-cell models, as both samples experience the same pressure, temperature, and shear history.
Time and Cost Savings: By testing two samples in a single run, lab productivity increases, reducing operational downtime and costs associated with repeated calibrations.
Better Quality Assurance: Facilitates real-time benchmarking (e.g., comparing a reference fluid with a new formulation), improving accuracy in quality control processes.
Reduced Instrumental Error: Single-cell devices may suffer from drift between tests, whereas dual-cell systems minimize this risk by testing both samples under synchronized conditions.
Versatility in Research & Development: Ideal for R&D applications where comparative studies (e.g., additive effects, temperature/pressure responses) are critical.
Maximum Temperature | 250 ℃ / 482 ℉ |
Maximum Pressure | 200 MPa / 29,000 psi |
Thickening Time Range | 0 to 100 Bearden Units (Bc) |
Consistency Division | 1 Bc |
Slurry Cup Rotation Speed | 150 r/min±15 r/min |
Heater Power | 4,000 watts each |
Pressure Medium | Special Oil for Consistometer |
Ambient Temperature | 10 to 50 ℃ / 50 to 122 ℉ |
Compliance | API Spec.10 / GB10238-2015 |
Power | 110 or 220 VAC 50 Hz 5.5×2 kVA |
Compressed Air | 0.3 to 0.7 MPa / 43.5 to 102 psi |
Cooling Water | 0.2 to 0.6 MPa / 29 to 87 psi |
Dimensions | 1,300×740×1,750mm3 / 50×30×70 in3 |
Weight | 950kg / 2,100 lb |
Ideal for oil and gas drilling labs, this double cylinder consistometer is critical for optimizing cement slurry formulations, preventing premature setting, and ensuring wellbore stability.
Enhance your cement testing accuracy with the dual cell pressurized consistometer – the trusted choice for HTHP consistency analysis.
